M1112—Gunsmith Lathe with Stand

Description

This superb gearhead lathe hits the "bull's eye" with its high-precision spindle bearings, D1-5 camlock spindle, outboard spindle spider supports, quick-change gearbox, induction-hardened bed ways, and its extra-fine longitudinal feed rate of 0.0011" per rev. and cross feed rate of 0.0004" per rev. Other features include a heavy-duty, vibration-dampening steel stand, bearing-tipped follow rest and steady rest, and a tailstock that can be tightened with a torque wrench to achieve precise chuck-to-tailstock alignment each time the tailstock is locked down. Even if you are not a gunsmith, you’ll appreciate the high level of precision and generous features this lathe offers.

Specifications

  • Motor: 2 HP, 220V, single-phase, 1725 RPM
  • Swing over bed: 12"
  • Distance between centers: 36"
  • Swing over gap: 17"
  • Swing over cross slide: 7"
  • Swing over saddle: 11-11/32"
  • Cross slide travel: 6-1/4"
  • Compound travel: 3-1/4"
  • Carriage travel: 24"
  • Spindle speeds: 9 @ 70, 200, 220, 270, 360, 600, 800, 1000, 1400 RPM
  • Spindle bore: 1.57"
  • Spindle nose: D1-5 camlock
  • Spindle taper: MT#5
  • Spindle length with 3-jaw chuck: 21-3/4"
  • Spindle length with 4-jaw chuck: 21-1/4"
  • Spindle length with faceplate: 18-1/2"
  • Bed width: 7-1/4"
  • Tailstock barrel taper: MT#3
  • Tailstock barrel travel: 4"
  • Leadscrew: 8 TPI
  • Longitudinal feed range: 40 @ 0.0011"-0.0310"
  • Cross feed range: 40 @ 0.0004"-0.0105" in./rev.
  • Thread range (inch): 40 @ 4-112 TPI
  • Thread range (metric): 29 @ 0.2-4.5 mm
  • Max. tool size: 5/8"
  • Removable gap bed allows turnings up to 17" in diameter
  • Easy-to-use lever controls
  • Hardened-and-ground cast-iron bed
  • Full length splash guard
  • ON/OFF reverse switch on carriage
  • LED work light
  • Ball bearing steady/follow rests
  • Outboard end support screws
  • Socket for tailstock lock
  • Cast-iron stand with storage shelves
  • Cast-aluminum gear cover
  • 6" 3-Jaw chuck with 2-piece reversible jaws
  • 8" 4-Jaw chuck with reversible jaws
  • 10" faceplate
  • Tool box
  • Quick-change tool post with one tool holder
  • One MT#3 live center
  • Two MT#3 dead centers (one carbide-tipped)
  • Set of six change gears
  • 1/2" drill chuck with MT#3 arbor
  • Overall size: 61"L x 26" W x 54-1/2"H
  • Approximate shipping weight: 1251 lbs.
California Proposition 65 Warning