Wholesale Information
|
Catalogs
|
Contact Us
|
Copyright Info
|
Distribution
|
Hot Links
M1020 - SHOP FOX® 14" X 40" Lathe
If your job shop is in need of a quality lathe, then the Model M1020 is your answer. Powered by a 3HP motor, this lathe features 12-speeds, a generous 14" swing, 40" distance between centers and 62 different standard and metric threading options. Remove the gap and give yourself an extra 6" in diameter. 3" jaw and 4" jaw chucks, coolant pump, halogen lamp plus a whole lot of accessories are standard on this machine.
Foot brake
Hardened and ground gears in headstock
Induction hardened bedways
Jog button and emergency stop
Micrometer carriage stop
Inch/metric dials
6" 3-jaw chuck with two piece jaws
8" 4-jaw chuck
12" faceplate
Steady rest / follow rest
4-way turret tool post
MT #3 dead center
Coolant system with back splash
Threading dial
Halogen lamp
One piece cast iron stand
Motor: 3 HP, 220V, single-phase, 60 Hz, 1725 RPM
Swing over bed: 14"
Swing over gap: 20"
Swing over saddle: 8-1/2"
Distance between centers: 40"
Bed width: 10-1/4"
Spindle bore: 1-1/2"
Spindle nose: D1-4 Cam lock
Spindle nose taper: MT #5
Cross slide travel: 7"
Compound travel: 3-1/2"
Tailstock barrel taper: MT #3
Tailstock barrel travel: 4-5/8"
Range of speeds: (12 speeds) 40-1800 RPM
Number of longitudinal and cross feeds: 40
Range of longitudinal feeds (in./rev.): 0.0012" 0.0294"
Range of cross feeds (in./rev.): 0.0006"-0.0147"
Number of inch threads: 40
Range of inch threads: 4-112 TPI
Number of metric threads: 22
Range of metric threads: 0.45-7.5mm
Leadscrew: 8 TPI
Feed rod diameter: 3/4"
Height: 45"
Length: 80"
Width: 29-1/2"
Approximate shipping weight: 2738 lbs.
